Essilor Instruments DELTA Скачать руководство пользователя страница 86

Страница: 86 / 187

Grouping the drilling points

If you need to modify several drilling points simultaneously, you can group them together provided

they are on the same side of the shape (nasal side / temporal side).

By default, the

symbol is displayed: each drilling point can be modified individually.

•

Press

is displayed. All future modifications will be applied to all drilling points in the same way:

◦

only the reference drilling point is modifiable,

◦

the coordinates of the other drilling points are greyed out.

•

To un-group the drilling points, press

again.

Reference drilling point

The first drilling point you create on a shape automatically becomes the 'reference drilling point' in relation to

which the others are positioned:

•

Each side (nasal and temporal) has its reference drilling point, identified by its dark blue colour

•

It is identified by the symbol # on the left of its coordinates.

SER

ANUAL

> VI. P

REPARING

DRILLED

JOB

Delta - Edging System > V1- 02-2020

Содержание DELTA




























































































































































































Результаты поиска

Содержание DELTA

Отзывы:

Essilor Instruments DELTA, Руководство пользователя, Страница: 86 / 187

Результаты поиска

Содержание DELTA

Отзывы: