Essilor Instruments DELTA Скачать руководство пользователя страница 77

Страница: 77 / 187

The original shape is displayed in light red.

Cancelling a modification

•

Press

once to cancel the last modification made to the shape.

•

Press

twice consecutively to return to the original shape.

Once the shape is modified, press

to save and go back to the centering screen.

3. A

RCHIVING

SAVING

SHAPE

This function enables you to save a modified shape to a new job with a new ID while keeping the original

job.

Press

The job-creation alphanumeric keypad is displayed.

A new ID is allocated (first free slot in the selected list).

You can also give it a different ID.

Enter a reference for the shape to be saved.

Press

to confirm.

The shape is archived in a new job with a new ID and is displayed in the shape modification screen.

Delta - Edging System > V1- 02-2020

SER

ANUAL

> V. M

ODIFYING

THE

LENS

SHAPE

Содержание DELTA




























































































































































































Результаты поиска

Содержание DELTA

Отзывы:

Essilor Instruments DELTA, Руководство пользователя, Страница: 77 / 187

Результаты поиска

Содержание DELTA

Отзывы: