Essilor Instruments DELTA Скачать руководство пользователя страница 117

Страница: 117 / 187

Press

The feeling cycle starts.

The customized drilling screen is displayed.

Select the type of drilling you want to do.

If necessary, select the drilling point(s) you want to modify.

If necessary, modify the diameter and/or angle of the selected drilling point.

The difference between the initial value and the modified one is displayed in the delta column.

Press

The edging cycle starts.

When the edging cycle is finished, the retouch screen is displayed.

Press

to release the lens.

If necessary, retouch the lens.

Otherwise, start edging the second lens. Select the lens directly on the screen, on the left or right of the

work area.

The edging screen for the second lens is displayed. All finishes chosen and the modifications made

are kept.

Delta - Edging System > V1- 02-2020

120

SER

ANUAL

> VII. E

DGING

LENS

Содержание DELTA




























































































































































































Результаты поиска

Содержание DELTA

Отзывы:

Essilor Instruments DELTA, Руководство пользователя, Страница: 117 / 187

Результаты поиска

Содержание DELTA

Отзывы: