Essilor Instruments DELTA Скачать руководство пользователя страница 174

Страница: 174 / 187

•

Environment

(

p.178)

•

General features

(

p.178)

•

“Tracer centering device blocker” function

(

p.179)

•

“Edger” function

(

p.180)

1. E

NVIRONMENT

To install your digital machine and to profit from its utmost precision, it is necessary that you have a stable

work surface, isolated from shocks and oscillations, perfectly horizontal and at a proper height

(approximately 70 cm).

The temperature and the humidity of the room where you use your machine must be within the following

ranges of values:

Operation:

•

Temperature b10 °C and +40 °C

•

Humidity: between 30% and 75%

Storage:

•

Temperature between -+5°C and +50°C

•

Humidity: between 25% and 95%

Altitude: < 2,000 m

Degree of pollution: 2

Avoid sudden changes in temperature and humidity and install your system:

•

in an area not directly exposed to sunlight

•

away from all heat sources

•

away from all strong magnetic fields

•

away from all chemical products, corrosive vapours and liquids

Take care not to block the vents and to leave enough space above the device. Do not place any object on the

device. Avoid exposing the device to vibrations or shocks.

The back of your machine must be at least 20 cm away from a wall.

2. G

ENERAL

FEATURES

•

Networking possibility:

◦

Essibox

•

RS232C and RJ45 ports

•

Integrated auto-maintenance functions (self-calibration, autotests)

•

Dimensions: L 550, D 500, H 580 mm

•

Size of colour touch screen: 8.4 inches

•

Weight: 57 kg

•

Power supply: 220-240V – 50/60 Hz or 100-120V – 50/60 Hz

•

Power consumption: 1350 W – 10 A for 230 V and 15 A for 115 V

Delta - Edging System > V1- 02-2020

178

SER

ANUAL

> X. T

ECHNICAL

DATA

Содержание DELTA




























































































































































































Результаты поиска

Содержание DELTA

Отзывы:

Essilor Instruments DELTA, Руководство пользователя, Страница: 174 / 187

Результаты поиска

Содержание DELTA

Отзывы: