Quadro4Li Manual II: Administrator's Guide
Administrator’s Menus
Quadro4Li; (SW Version 5.3.x)
8
The
System Configuration
page contains the host name, IP
address and Subnet Mask information about the Quadro LAN
interface. These settings make Quadro available to the
internal network.
The
System
Configuration
page offers the following input
options:
Host Name
requires a host name for the Quadro device.
Domain Name
requires the LAN side domain name which
the Quadro belongs to.
IP Address
requires the Quadro host address for the LAN
interface.
Subnet Mask
requires the Quadro hosts’ Subnet Mask.
Fig. II-4: System Configuration Wizard - System Configuration page
The
Regional Settings and Preferences
are used to select
settings specific to the location of the Quadro. This is
important for the functionality of the voice subsystem.
The
Regional Settings and Preferences
page has two drop
down lists to select the
Location
(country) and a
corresponding
Timezone
.
Quadro will support Daylight
Savings (DST) correction if it is available for the selected time
zone.
This page also has a manipulation radio button group to
choose:
•
System
Language
– selection is available only when
the custom Language Pack has been uploaded and it
is used to enable custom language for system voice
messages or returning back to the default language
English.
•
GUI Theme
- selection used to select the GUI theme
style of the web based configuration pages.
The
Choose Theme on Login
checkbox indicates whether
the GUI theme selection radio buttons should be displayed
on the Quadro Login page. Selecting the checkbox will allow
users to choose the GUI theme before logging into the
Quadro. Leaving the checkbox unselected will require the
administrator to run the System Configuration Wizard to
change the theme.
Fig. II-5: System Configuration Wizard - Regional Settings page
The
Emergency Codes
and
PSTN Access Codes Settings
are used to configure the emergency dial plan.
The
Emergency Codes
text field requires the PSTN
numbers of the emergency or lifeline services. Multiple
emergency codes, separated by commas, can be inserted in
this field. For each emergency code, a routing pattern will be
generated in the Call Routing Table, which will allow faster
and easier calls to emergency destinations.
The
PSTN Access Code
drop down list allows you to select
the prefix code for accessing the PSTN line in the routing
mode. Dialing the digits inserted in this text field will provide
the PSTN dial tone when dialed from the handset.
Fig. II-6: System Configuration Wizard - Emergency Codes and PSTN Codes Settings page
