Quadro4Li Manual II: Administrator's Guide
Administrator’s Menus
Quadro4Li; (SW Version 5.3.x)
91
bypass the IVR system on the call path and establish a direct call. The two-stage dialing is available for PBX, ISDN, and E1/T1 (if available on the
model) call types.
Suffix
requires entering the symbols (letters, digits and any characters supported in the SIP username) that will be placed in the end of the routing
pattern. For example, if the routing
Pattern
is 12345, the
Number of Discarded Symbols
is two, and the
Prefix
is 909 and
Suffix
is 0a, the final
phone number will be 9093450a.
Call Type
gives you the option to select the call type. The following call types are available:
•
PBX - local calls to Quadro’s extensions
•
PBX-Voicemail
-
calls directly to the voice mailbox of the local PBX extension
•
PBX-Intercom - local calls to PBX extensions with the request of Intercom service (see Manual III – Extension Users Guide)
•
SIP – calls through a SIP server
•
SIP_Tunnel – calls through a SIP tunnels established (see
•
IP-PSTN – calls through the IP-PSTN provider to the remove PSTN global telephone network
•
ISDN - calls to a ISDN global telephone network.
Metric
allows entering a rating for the selected route in a range from 0 to 20. If a value is not inserted into this field, 10 will be used as the default. If
two route entries match a user’s dial string, the route with the lower metric will be chosen.
The
Description
text field requires an optional description of the routing pattern.
The
Filter on Source / Modify Caller ID
checkbox selection allows limiting the functionality of the current route to be used by the defined caller(s)
only. If this checkbox is enabled, source caller information (
Source Number Pattern
,
Source Type, Source Host
, etc.) will be required later in the
Call Routing Wizard
. This option is enabled by default.
The
Set Date / Time Period(s)
checkbox selection allows you to define a validity period(s) for current routing patterns to take place and to define
pattern date/time rules. When this checkbox is enabled, the
Call Routing Wizard
page will be displayed.
The
Set Overall Calling Time Limit
checkbox selection allows the total call duration for all calls to be configured over a specific time frame for each
Call Routing entry. Once the total duration has been reached, the entry can be disabled, allowing calls to use the next available route.
If this checkbox is not selected in the
Call Routing Wizard
first page, the overall call duration will be unlimited. When this checkbox is selected,
Call
Routing Wizard
-
Routing Overall Call Limitation Settings
page will be displayed.
Please Note:
The
Overall Calling Time Limitation
checkbox is not allowed for
PBX
,
PBX-Voicemail
and
PBX-Intercom
destination types routing
rules.
Set Tracing / Debug Options on This Rule
checkbox is used to switch events notification on the certain execution results of the corresponding
routing rule. When this checkbox is enabled, the
Call Routing Wizard
page will be displayed.
Require Authorization for Enabling/Disabling
checkbox is used to enable administrator’s password authentication when enabler/disabler keys are
configured for the routing rule. The service can be used locally from the handset (see Feature Codes in Manual III - Extension Users Guide) or
remotely from Auto Attendant (see Auto Attendant Services in Manual III - Extension Users Guide). When this checkbox is selected, administrator’s
password will be requested to enable/disable the certain routing rule(s). If the administrator’s password has been inserted incorrectly for 3 times, no
status changes will be applied to any of the routing record(s), even to those which have no authorization enabled.
Enabler Key
and
Disabler Key
text fields request digit combination which should be dialed from the handset or Auto Attendant to enable or disable
the certain routing rules in the Call Routing Table. You can set the same Enabler/Disabler Key for multiple routing rules (the same key may be used
as enabler for one routing rule, and as disabler for another one) - this will allow managing several routing rules with the single key.
