Quadro4Li Manual II: Administrator's Guide
Administrator’s Menus
Quadro4Li; (SW Version 5.3.x)
88
The
SIP Tunnel Settings
page is used to enable the Quadro as
a slave or master device for SIP tunneling. The page consists of
the following components:
The
Enable Tunnels to Slave Devices
checkbox enables the
Quadro as a master device and allows you to configure the SIP
tunnels to the slave Quadros. When this checkbox is enabled
the
Tunnels to Slave Devices
table needs to be configured.
The link
Tunnels to Slave Devices
moves you to the page
where a list of slave devices needs to be defined.
Fig. II-154: SIP Tunnel Settings page
The
Tunnels to Slave Devices
page consists of a table where
slave devices are listed with the corresponding authentication
parameters.
Add
functional button leads to the
Add Entry
page where a new
slave device parameters needs to be provided.
The
Add Entry
page consists of the following components:
The
SIP Tunnel Name
text field requires the tunnel name for
the corresponding connection. System suggests you to start the
SIP tunnel name with the “SIP_Tunnel_” words, according to the
automatic prefix used for the SIP tunnels on the Quadro,
however this is not mandatory.
The
User Name
text field requires the authentication user
name. The field in front of this text field displays the default non-
editable prefix for SIP tunnels: “SIPTunnel_”.
The
Password
text field requires the authentication password.
Please Note:
The
User Name
and
Password
should match
both on master and slave Quadros for the successful SIP tunnel
establishment.
The
Symmetric NAT
checkbox should be selected when the
slave Quadro is located behind the symmetrical NAT.
Fig. II-155: SIP Tunnel Settings – Tunnels to Slave Devices page
Fig. II-156: SIP Tunnel Settings – Tunnels to Slave Devices – Add Entry page
The
Enable Tunnels to Master Devices
checkbox enables the
Quadro as a slave device and allows connecting to the master
Quadro via SIP tunnel. When this checkbox is enabled the
Tunnels to Master Devices
table needs to be configured.
The link
Tunnels to Master Devices
moves you to the page
where a list of master devices needs to be defined.
Fig. II-157: SIP Tunnel Settings – Tunnels to Master Devices page
The
Tunnels to Master Devices
page consists of a table where master devices are listed with the corresponding authentication parameters.
Add
functional button leads to the
Add Entry
page where a new master device parameters needs to be provided.
The
Add Entry
page consists of the following components:
The
Enable Registration
checkbox selection is used to enable the registration to the corresponding master device.
