Quadro4Li Manual II: Administrator's Guide
Administrator’s Menus
Quadro4Li; (SW Version 5.3.x)
47
The
Shared Mailbox
section is used to setup a mailbox sharing. The
Edit Voice Mailbox Access List
link goes to the page where a list of
PBX extensions can be defined for which the mailbox of the current extension will be shared and accessible without password authentication.
For more details on how to access Shared Mailboxes, see
Feature Codes
.
•
Use External Voice Mail
– enables the Voice Mail service for the corresponding extension and is used to define a remote Voice Mail Server as
a location for the Voice Mails. In this case recorded voice mails will be collected on the remote server. Radio button selection enables a sub-
group of manipulation radio buttons:
If the remote Voice Mail Server is combined with the SIP Proxy server, it is recommended to select
Proxy Controlled Mailbox Type
. With this
selection, SIP proxy will keep the recorded voice mail on itself. When extension accesses his mailbox by dialing *0, the call will be redirected to
the voice mailbox on the proxy server.
If the remote Voice Mail Server acts as a standalone location of voice mails, it is recommended to select
Independent Mailbox Type
. With this
selection, Quadro redirects the recorded voice mails to the defined remote Voice Mail server. When extension accesses his mailbox by dialing
*0, the call will be redirected to the remote voice mail server.
For each of these selections, it is required to enter the SIP URI of the Voice Mail Server where voice mails of the corresponding extension will
be collected.
The
Transport Protocol for SIP messages
radio buttons allow the transport protocol (UDP or TCP) for transmission of SIP messages to be
selected.
With
MS Exchange Server
you can keep recorded voice
messages into one universal inbox.
o
UM Auto Attendant URI
text field requires the SIP
URI of the MS Exchange Server. When extension
accesses his mailbox by dialing *0, the call will be
redirected to the voice mailbox on the MS Exchange
Server.
o
UM Extension
text field requires an extension number
that Unified Messaging will use when voice mail is
submitted to the user's MS Exchange Server mailbox.
Please Note:
When the
MS Exchange Server
option is
selected as an external voice mail server, the transport protocol
TCP
is automatically used regardless of the
Transport Protocol
for SIP messages
radio button selection.
Attention:
By choosing the
Use External Voice Mail
option,
some internal voice mailbox services may become unavailable.
Instead, the services of the external voice mail server will
become available to the user. Please consult with the external
voice mail server administrator before enabling this option.
Fig. II-84: Extensions Management - Edit Entry – Voice Mailbox Settings page
7. Class of Service Settings
The Class of Service Settings page is used to assign the
defined classes to a PBX extensions.
To use Class of Service feature it should be enabled from the
Class of Service page.
Class of Service feature allows to specify which PBX extensions
can use which routing rules to make a call. For example, if an
extension is not assigned to a certain class of service and an
attempt is made to place a call from that extension using routing
rule with the Class of Service feature enabled, then "Number
dialed does not exist" message will be played to the caller.
link leads to the Class of
Services page where the class of services can be configured.
link leads to the Call Routing
Table page where the call routing rules can be assigned to a
certain class of service(s). The classes defined in the Class of
Services page will appear on this page to assign the PBX
extensions to a certain class of service(s).
PBX extensions can be attached to a several class of services
at the same time.
Fig. II-85: Extensions Management - Edit Entry – Class of Service Settings page
