Quadro4Li Manual II: Administrator's Guide
Appendix: Software License Agreement
Quadro4Li; (SW Version 5.3.x)
139
Parameter
System Default Value
DCC Basic Support– no key found,
iQall Toggling Support- no key found,
IP phone support - no key found ,
Autodialer Support – no key found,
QCM support – no key found.
Language Pack
Default - English
Custom Language Pack – none
User Rights Management
Users - admin (enabled), localadmin (disabled).
Roles - Extension (all accessible pages for extension), Local Administrators (all
accessible pages for localadmin).
GUI Access Password-Old Password (empty), New Password(empty), Confirm New
Password(empty).
Phone Access Password- Old Password (empty), New Password (empty), Confirm
New Password (empty).
Extensions Management
Extension Length – 2, once applied extensions 00, 11-34 appear
All extensions are shown
Extension Settings – General
Display name – none,
Password – empty,
11-34 extensions attached to the IP lines 1-24,
Use Kickback - disabled,
Call Relay – disabled,
Login Allowed-disabled,
3pcc/Click2Dial Login Allowed-disabled,
Show on Public Directory – disabled,
Percentage of Total Memory – 4%.
Extension Settings – SIP
Registration username and password - automatically generated,
SIP server - empty,
SIP Server port – 5060,
SIP Server Registration –disabled.
Extension Settings – SIP Advanced
Authentication User Name – undefined,
Send Keep-alive Messages to Proxy – disabled,
RTP Priority Level – medium,
Do Not Use SIP Old Hold Method – disabled,
Outbound Proxy, Secondary SIP Server and Outbound Proxy for Secondary SIP
Server – undefined,
Secondary SIP Server Port - 5060.
Extension Settings – Remote
Remote Extension – disabled
Extension Settings – Call Queue
Call Queue – disabled
Extension Settings – Voice Mailbox
Voice Mailbox - Internal Voice Mail,
Configuration Wizard Status – activated.
Extension Settings – Codecs
Codecs - G711u (preferred), G711a, G729a – enabled, G726/16, G726/24,
G726/32, G726/40, iLBC, G.722, G.722.1, TDVC, H.263, H.263+ and H.264 –
disabled,
Out of Band DTMF Transport – enabled,
Enable T.38 FAX – enabled,
Enable Pass Through FAX – enabled,
Enable Pass Through Modem – disabled,
Force Self Codecs Preference for Inbound Calls – disabled,
SRTP Policy: Make unsecure calls, accept anything.
Attendant 00 Settings – General
Display name – Empty,
FAX forwarding – disabled,
Show on Public Directory – enabled,
Percentage of System Memory – 3%.
Attendant 00 Settings – Attendant
Scenario
Scenario – default,
Send AA digits to Routing Table – disabled,
Enable Redirection on Timeout – disabled,
