Quadro4Li Manual II: Administrator's Guide
Administrator’s Menus
Quadro4Li; (SW Version 5.3.x)
110
The
RTP Streaming Channels
page consists of a table where
RTP channels are listed.
Add
opens the
Add Entry
page where a new RTP channel can be
added.
The
Add Entry
page includes the following text fields:
The
RTP Channel Name
text field requires the name or the
number of the RTP channel.
The
Port Number
text field requires the broadcasting RTP port
number.
The
Description
text field requires optional information related to
the RTP streaming channel.
Fig. II-184: RTP Streaming Channel page
Fig. II-185: RTP Streaming Channel – Add Entry page
Class of Service
The current implementation of
Class of Service
(CoS) on Quadro is used to define the permissions that PBX extensions will have when using call
routing rules to make a call.
The
Class of Service
feature provides the ability to set restrictions on the call routing rules for each extension. The
Class of Service
functionality
allows to permit or deny the attempt of extensions to use certain types of call routing rules.
Suppose you want for a certain group of PBX extensions to deny the right to make international calls, but allow them to make local and long distance
calls and for another group of PBX extensions give a permission to make international calls only.
Class of Service allows to specify which extensions can use which routing rules to make a call.
For example, if an extension is not assigned to a certain class of service and an attempt is made to place a call from that extension using routing rule
with the Class of Service enabled, then “
Number dialed does not exist
” message will be played to the caller.
The permissions for a group of PBX extensions can be changed easily by modifying the CoS variable for each PBX extension.
On Quadro the defined CoS variables are associated with PBX extensions and call routing rules in the Call Routing Table.
In order to configure CoS feature, follow the steps below:
•
At first assign the specified CoS(s) to a certain routing rule(s).
•
Assign the specified CoS(s) to the PBX extension(s).
If there is no CoS assigned to the call routing rule, that rule will be generally available for any PBX extension whether it is attached to a CoS or not.
Please Note:
If the
Enable Class of Service
option is disabled, call routing rule(s) that are assigned to a certain CoS(s) will be available for any
PBX extension, if there are no any other filtering limitations.
