![background image](http://html.mh-extra.com/html/epiphan/networked-vga-grid/networked-vga-grid_user-manual_2417793076.webp)
Networked VGA Grid User Guide
Configure a static IP address
6. Select the
Maintenance
link under the Configuration menu; the maintenance page appears.
7. Click the
Reboot Now
button near the bottom of the page.
8. Wait for the system to reboot.
9. Connect to the Admin panel using your preferred connection mechanism. See
.
10. Log as admin and reload the Networking page to verify all changes were applied.
The following table describes the fields applicable when configuring DHCP on the Networked VGA Grid.
Table 19
DHCP Fields
Label
Description/Options
Use DHCP
Select this radio button to dynamically obtain an IP address at boot up.
Use static
address
Select this radio button to use the configured static IP address.
MTU Size
The maximum transmission unit (MTU) specifies the maximum packet size for transfer on
the network. The default value is 1500, which is the largest value allowed by Ethernet at
the network layer. It’s best if all nodes in your network use the same value, so only change
this value if you know other nodes use a different value.
Configure a static IP address
Your network administrator may require you to use a static IP address for your Networked VGA Grid.
To configure a static IP address:
1. Login to the Admin panel as
admin
.
2. Select the
Network
link in the Configuration menu; the network configuration page opens.
76
Содержание Networked VGA Grid
Страница 1: ...Networked VGA Grid User Guide Release 3 17 0n July 5 2016 UG104 08 ...
Страница 386: ......
Страница 387: ... and 2016 Epiphan Systems Inc ...