SB36TL-20-BA-BEN115010 | IMEN-SB36TL | Version 1.0
EN
PV Inverter
SUNNY BOY 3600TL
User Manual
Symbols on the Inverter
Operation display.
An error has occurred. Please inform your installer
immediately
.
Bluetooth
® Wireless Technology.
Bluetooth
communication is active.*
Symbols on the Type Label
Beware of dangerous electrical voltage.
The inverter operates at high voltages. All electrical work on the inverter may be
carried out by qualified personnel only.
Beware of hot surface.
The inverter can become hot during operation. Avoid contact during operation.
Observe the enclosed documentation.
The inverter must not be disposed of with the household waste.
Further disposal information can be found in the enclosed installation guide.
CE mark. The inverter complies with the requirements of the applicable EC
guidelines.
Device class label. The inverter is equipped with a wireless component that complies
with the harmonized standards.
Certified safety.
The inverter complies with the requirements of the Equipment and Product Safety Act
in Europe.
RAL quality mark for solar products. The inverter complies with the requirements of
the German Institute for Quality Assurance and Labeling.
Direct Current (DC)
Alternating Current (AC)
The inverter is protected against penetration by dust particles and water jets from
any angle.
The inverter is transformerless.
*The
Bluetooth
® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use
of these marks by SMA Solar Technology AG is under license.
AC
Abbreviation for "alternating current".
Bluetooth
Bluetooth
is a radio technology that allows the inverter and other communication devices to
communicate with each other
. Bluetooth
communication does not require visual contact between the
devices.
DC
Abbreviation for "direct current".
Electronic Solar Switch (ESS)
The Electronic Solar Switch is part of the inverter's DC disconnection unit. The Electronic Solar Switch
must be securely inserted into the bottom of the inverter and may
only be removed by qualified personnel.
PV
Abbreviation for photovoltaics.
Visual Inspection
Check the inverters and the cables for visible external damage. Contact your installer if you find any
defects. Do not perform any repair work yourself.
Maintenance and Cleaning
If the display field or the LEDs are dirty and you find it difficult to read the operating data and
operating states of the inverter, clean the display and the LEDs with a damp cloth. Do not use any
corrosive substances (e.g. solvents, abrasives) for cleaning. Ask your installer to check for correct
inverter operation at regular intervals.
VISUAL INSPECTION, MAINTENANCE AND CLEANINg
ExPLANATION Of SYMBOLS
gLOSSArY
Installer contact
CONTACT
If you have technical problems, first contact your installer. The following information is required in
order to provide you with the necessary assistance:
• Inverter device type
• Inverter serial number
• Type and number of PV modules connected
• Event number or display message of the inverter
• Optional equipment (e.g. communication devices)
SMA Solar Technology Ag
Sonnenallee 1
34266 Niestetal, Germany
www.SMA.de
SMA Service Line
Inverters:
+49 561 9522 1499
Communication: +49 561 9522 2499
Fax:
+49 561 9522 4699
E-Mail:
