epiphan Networked VGA Grid, Руководство пользователя

Страница: 26 / 387

Networked VGA Grid User Guide Step 4: Add the encoder as a channel
Whether or not you chose to use a static IP address, the next step is to add the encoder as a channel.
The serial numbers and IP addresses for your system will not be the same as the examples shown
below.
1. From the Admin panel, scroll to the Channels section and click Add channel ; the add channel
configuration page appears.
2. From the Admin panel, scroll to the Channels section and click External encoder ; the external
encoder selection page appears. Your list should contain just the one VGA Grid HD Encoder set up in
Step 1, but if it has several, like the example below, match the serial number with the serial number
printed on the bottom of your encoder.
3. Copy the IP address for your VGA Grid HD Encoder from the list and paste it in the Device URL field.
4. Leave the admin password blank (this is the default) unless you assigned an admin password earlier.
5. Click Apply ; your channel is added as a new channel named External [<ip address>].
6. Click Status to confirm the new name.
26