![background image](http://html.mh-extra.com/html/epiphan/networked-vga-grid/networked-vga-grid_user-manual_2417793347.webp)
Networked VGA Grid User
Guide
Control with HTTP commands
Control with HTTP commands
Networked VGA Grid has an HTTP API interface for configuration and control by a third party application or
with a script that sends commands to the system as a series of URLs. This section covers the following topics:
l
l
l
Global variable HTTP command syntax for custom layouts
HTTP command syntax
Control of the Networked VGA Grid by HTTP is done by sending commands to one of two URLs and specifying
the target configuration item. Syntax for the get and set commands follows.
Many commands require a
channel
or
recorder
index as an argument. A channel's index is found by looking at
the Channels list in the Admin panel. In the screen capture below, the channel with index 1 is currently
recording (it's index number is red). To address this channel via http commands, use the index channel1.
For commands requiring a recorder index, determine your recorder's index by combining the recorder's
number with the prefix
channelm
. In the example below, the second recorder's index is 2. To access this
recorder via http commands, use the index channelm2.
347
Содержание Networked VGA Grid
Страница 1: ...Networked VGA Grid User Guide Release 3 17 0n July 5 2016 UG104 08 ...
Страница 386: ......
Страница 387: ... and 2016 Epiphan Systems Inc ...