![background image](http://html.mh-extra.com/html/epiphan/networked-vga-grid/networked-vga-grid_user-manual_2417793194.webp)
Networked VGA Grid User Guide
Force the capture card to use a specific EDID
Upload a new EDID
In most circumstances the factory installed default EDID, is sufficient. However, there may be some cases
where a video source uses resolutions that you do not want to use. In that case you can choose an EDID that
forces the Networked VGA Grid's capture card to use a specific set of attributes.
The uploaded EDID is permanently installed on your system and this capture card (a "Source" in the Admin
panel) will always share the uploaded EDID with the connected video input source.
EDID changes are permanent until you replace them with another EDID or specifically choose to
restore the facotry EDID for a given source. Not even a system-level factory reset removes the
configured EDIDs.
1. To download a new EDID file, go to the
web page. The support page opens.
2. Select the support page for Networked VGA Grid.
3. Scroll to the
EDID
section.
4. Click on an EDID from the list. The file is saved to your downloads folder on your hard drive.
5. Connect to the Admin panel of the VGA Grid HD Encoder using your preferred connection mechanism.
6. Login as admin.
7. From the Admin panel, click
Frame Grabber
from the Configuration menu; the Frame Grabber
Adjustments page opens.
8. Scroll to the
EDID upload
section.
9. Click
Choose File
; a file browser opens.
10. Browse to the location where the custom EDID file was saved and select the file.
11. Click
open
; the EDID filename is displayed on the screen.
194
Содержание Networked VGA Grid
Страница 1: ...Networked VGA Grid User Guide Release 3 17 0n July 5 2016 UG104 08 ...
Страница 386: ......
Страница 387: ... and 2016 Epiphan Systems Inc ...