![background image](http://html.mh-extra.com/html/epiphan/networked-vga-grid/networked-vga-grid_user-manual_2417793074.webp)
Networked VGA Grid User Guide
Verify IP address and MAC address
transmission unit (MTU) values.
7. Click
Apply
to save the changes; the changes are saved and a message appears asking you to reboot.
8. Select the
Maintenance
link under the Configuration menu; the maintenance page appears.
9. Click the
Reboot Now
button near the bottom of the page.
10. Wait for the system to reboot.
11. Connect to the VGA Grid HD Encoder's Admin panel using your preferred connection mechanism. See
12. Log as admin and reload the Networking page to verify all changes were applied.
The following table describes the fields applicable when configuring DHCP on the VGA Grid HD Encoder.
Table 17
DHCP Fields
Label
Description/Options
Use DCHP
Select this radio button to dynamically obtain an IP address at boot up.
Use static
address
Use static address Select this radio button to use the configured static IP address.
MTU Size
The maximum transmission unit (MTU) specifies the maximum packet size for transfer on
the network. The default value is 1500, which is the largest value allowed by Ethernet at
the network layer. It’s best if all nodes in your network use the same value, so only change
this value if you know other nodes use a different value.
Verify IP address and MAC address
The Admin panel shows you the system’s MAC address and current IP Address via the Network configuration
page.
To view settings on network configuration page:
1. Login to the Admin panel as
admin
.
2. Select the
Network
link in the Configuration menu; the network configuration page opens.
3. Note the
MAC address
and
Current IP address
listed at the top of the page.
74
Содержание Networked VGA Grid
Страница 1: ...Networked VGA Grid User Guide Release 3 17 0n July 5 2016 UG104 08 ...
Страница 386: ......
Страница 387: ... and 2016 Epiphan Systems Inc ...