![background image](http://html.mh-extra.com/html/epiphan/networked-vga-grid/networked-vga-grid_user-manual_2417793072.webp)
Networked VGA Grid User Guide
Configure encoder network settings
5. Select the radio button
use static address
, if not already selected.
6. Enter the desired
IP Address
and
Network Mask
.
Only IPv4 addresses are supported.
7. Enter the
Default Gateway
address. If you do not have a default gateway for your network, enter the
new static IP address of the Networked VGA Grid that is found on the
Network
page in its Admin
panel.
The default gateway cannot be left blank. If no default gateway is specified, unexpected
behavior occurs.
8. Enter the
DNS Server
address. If you do not have a DNS server, enter the new static IP address of the
system.
The DNS Server address cannot be left blank. If no DNS Server is specified, unexpected
behavior occurs.
9. Click
Apply
to save the changes; the changes are saved and a message appears asking you to reboot.
10. Select the
Maintenance
link under the Configuration menu; the maintenance page appears.
11. Click the
Reboot Now
button near the bottom of the page.
The following table describes applicable fields when setting a static IP address.
72
Содержание Networked VGA Grid
Страница 1: ...Networked VGA Grid User Guide Release 3 17 0n July 5 2016 UG104 08 ...
Страница 386: ......
Страница 387: ... and 2016 Epiphan Systems Inc ...