![background image](http://html.mh-extra.com/html/epiphan/networked-vga-grid/networked-vga-grid_user-manual_2417793343.webp)
Networked VGA Grid User
Guide
Control with RS-232 / serial port
The table describes the RS-232 commands supported by the Networked VGA Grid.
Table 48
Supported RS-232 Commands
Command Name
Description
Recording Commands
START.<channel>
START.<recorder>
Starts recording for the provided channel or recorder. This can alternatively be
accomplished with the following set commands:
SET.<channel>.rec_enabled=on
SAVECFG
If the channel is already recording, the current recording is continued.
START
Starts recording for all channels and recorders.
There is no RS-232 command to restart recording. If recording is
already active when the start command is issued, the recording
continues.
STOP.<channel>
START.<recorder>
Stops recording for the provided channel or recorder. This can alternatively be
accomplished with the following set commands:
SET.<channel>.rec_enabled=""
SAVECFG
STOP
Stops recording for all channels and recorders.
SNAPSHOT.<channel>
Takes a snapshot image of the current channel (supported only if the channel is
configured to use the Motion JPEG codec). Snapshots are saved with recording
files on the system.
SNAPSHOT
Takes a snapshot image of all channels (supported only for channels configured to
use the Motion JPEG codec). Snapshots are saved with recording files on the
system.
343
Содержание Networked VGA Grid
Страница 1: ...Networked VGA Grid User Guide Release 3 17 0n July 5 2016 UG104 08 ...
Страница 386: ......
Страница 387: ... and 2016 Epiphan Systems Inc ...