Networked VGA Grid User Guide
Create an HD Encoder channel
7. Click
use it
or copy the IP Address or serial number of your encoder from the list and paste it in the
Device URL
field.
If the IP address of the VGA Grid HD Encoder changes, the VGA Grid will no longer be able to
receive signal from the encoder. For this reason, we strongly recommend using a static
IP address for the encoder. See
Set a static IP address for the encoder
.
8. If your encoder has an admin password, enter the password in the
Device admin password
field. The
value entered is masked with dots.
9. Click
Apply
; the changes are applied but the page doesn't change.
10. Click the already highlighted
Sources
link from the channel menu; the page is refreshed with the
channel name, reflecting the IP address of the VGA Grid HD Encoder.
Your encoder is added to the VGA Grid. You can now configure it to show DVI (DVI channel), S-Video (video
channel), or both by following the methods described below. See
to change the channel
name.
See topics below for more information on configuring your HD Encoder:
l
HD Encoder time synchronization
l
Check VGA Grid HD Encoder status
l
Add an HD Encoder as a source (custom channel)
109
Содержание Networked VGA Grid
Страница 1: ...Networked VGA Grid User Guide Release 3 17 0n July 5 2016 UG104 08 ...
Страница 386: ......
Страница 387: ... and 2016 Epiphan Systems Inc ...