Epilog Laser Fusion Pro 32, Оригинальное руководство пользователя

Страница: 160 / 242

7. Select the Badges icon in the tool bar.
8. Set the Badge Setup parameters as shown
below:
Number of Copies: the number of
badges you want to create.
Score Lines: Optional setting that
you can use to vector cut badges if
you’re using material like plastic.
Use Plate: It’s important that this be
checked so that the graphic
corresponds with the actual plate
size you’re using.
Custom Size: The custom plate size
corresponds to the size of your
material you’re using to engrave the badges.
We’re going to laser a 12” x 12” piece of
plastic, so we’ve set this parameter to 12” x
12”.
Compress text equally over copies:
You do not need to check this box.
Long names will automatically be
compressed.
Replaceable Items/text: Select the
variable text you typed in earlier, in
this case.
Replacement Data File: If this box is
checked you can browse for a data file that
has the names already entered, such as a
tab delimited text file. If you do not check
this box, a box will open allowing you to type
in the data.
7
3
1
2
4
5
6
9. After clicking OK, the text substitution box
will open allowing you to enter or adjust the
names for your badges.
10. After clicking OK, you will be taken back to
your drawing page and badges will be
properly laid out and populated. You can see
that we have ten badges. One was left blank
intentionally because we had ten badges
and only nine names. You’re ready to print
your badges to the laser!
1
2
3
4
5
6
7
- 154 -
SECTION 9: OPTIONAL FEATURES