ENSONIQ ASR-X PRO, Руководство пользователя

Страница: 51 / 74

Insert Effect Parameters
ENSONIQ ASR-X Pro UserÕs Guide 43
LoShelf Fc 10Hz to 20.0kHz Sets the center of the low frequency EQ.
LoShelf Gain Off, -49.5dB to +24dB Sets the amount of boost or cut applied to this low
frequency shelf.
Mid 1 Fc 10Hz to 20.0kHz Sets the center of the mid frequency parametric.
Mid 1 Q 1.0 to 40.0 This parameter is a bandwidth control that determines
the width of the resonant peak at the center frequency
band. This parameter is equal to the cutoff frequency
divided by the bandwidth. By raising the value, you can
produce a narrower bandwidth.
Mid 1 Gain Off, -49.5dB to +24dB Sets the amount of boost or cut applied to this mid
frequency band.
HiShelf Fc 10Hz to 20.0kHz Sets the center frequency of the high frequency shelf.
HiShelf Gain Off, -49.5dB to +24dB Sets the amount of boost or cut applied to this high
frequency shelf.
EQ Output Off, -49.5dB to +24dB Controls the gain coming out of the parametric EQ.
22
2 2444 4 M
M
M Muuuullllttttiiii----TTTTaaaapppp D
D
D DD
D
D DLLLL
Multi-Tap DDL offers four diffusers in series feeding a nine-tap digital delay.
PPP Paaaarrrraaaam m m meeeetttteeeerrrr RRR Raaaannnnggggeeee D D D Deeeessssccccrrrriiiippppttttiiiioooonnnn
EQ Input Off, -49.5dB to +24dB Adjusts the input level trim to the EQ to eliminate the
possibility of clipping boosted signals.
EQ Output Off, -49.5dB to +24dB Controls the gain coming out of the parametric EQ.
Mid 1 Fc 10Hz to 20.0kHz Sets the center of the mid frequency parametric.
Mid 1 Q 1.0 to 40.0 This parameter is a bandwidth control that determines
the width of the resonant peak at the center frequency
band. This parameter is equal to the cutoff frequency
divided by the bandwidth. By raising the value, you can
produce a narrower bandwidth.
Mid 1 Gain Off, -49.5dB to +24dB Sets the amount of boost or cut applied to this mid
frequency band.
Diffusion 1 -99% to +99% Sets the amount and phase of the first diffuser.
Diffus Time 1 0ms to 62ms Sets the delay time of the first diffuser.
Diffusion 2 -99% to +99% Sets the amount and phase of the second diffuser.
Diffus Time 2 0ms to 62ms Sets the delay time of the second diffuser.
Diffusion 3 -99% to +99% Sets the amount and phase of the third diffuser.
Diffus Time 3 0ms to 62ms Sets the delay time of the third diffuser.
Diffusion 4 -99% to +99% Sets the amount and phase of the fourth diffuser.
Diffus Time 4 0ms to 62ms Sets the delay time of the fourth diffuser.
Dly Interval Uniform, , Linear-,
Expon.+, Expon.-, Random
Controls the spacing of the taps within the DDL.
MaxDlyTime 1/1 Sys to 1/32 Sys, 0ms to
500ms
Controls the maximum delay time.
Dly Smoothing 0ms to 500ms Controls the amount of time it takes to change from one
Dly Max Time setting to another. Low values result in
more clicking but less detuning. High values result in
less clicking but more detuning.
Feedback Tap 1 to 9 Selects one of the nine taps to be fed back into the input
of the effect.
Dly Feedback -99% to +99% Determines the amount of signal that will be fed from
the output back into the input, increasing the number of
repeats in the delay.
Dly Damping 10Hz to 20.0kHz Controls the cutoff of a low pass filter on the feedback
signal, which adjusts the amount of damping to the
feedback signals. The lower the number, the more the
signals are damped.