ENSONIQ ASR-X PRO, Руководство пользователя

Страница: 59 / 74

Insert Effect Parameters
ENSONIQ ASR-X Pro UserÕs Guide 51
33
3 3111 1 PPPPiiiittttcccchhhh D
D
D Deeeettttuuuunnnneeeerrrr
Pitch Detuner allows you to change the pitch of a sound to any pitch within a range of two octaves in
either direction. We recommend using this insert effect as an LFO-controlled detuner.
PPP Paaaarrrraaaam m m meeeetttteeeerrrr RRR Raaaannnnggggeeee D D D Deeeessssccccrrrriiiippppttttiiiioooonnnn
Voice1 Semi -24 semi to +24 semi Allows you to adjust the pitch of voice 1 up to two
octaves above or below the original pitch in semi-tones
(half steps).
Voice1 Fine -100cent to +100cent This parameter allows you to fine tune the pitch of voice
1.
Voice1 Level Off, -49.5dB to 0.0dB Adjusts the volume of voice 1.
Voice1 Regen -99% to +99% Controls the amount of feedback from the output of the
pitch detuner back into the input. This allows you to
create special effects with ascending/descending delays.
Voice1 Width 1ms to 185ms Controls the splice width of voice 1. Select the width
that sounds best to you. Shorter values result in a
grainier sound, while longer values sound smoother.
Voice1 Mod 0% to 100% Controls the amount of modulation applied to voice 1.
Voice2 Semi -24 semi to +24 semi Allows you to adjust the pitch of voice 2 up to two
octaves above or below the original pitch in semi-tones
(half steps).
Voice2 Fine -100cent to +100cent This parameter allows you to fine tune the pitch of voice
2.
Voice2 Level Off, -49.5dB to 0.0dB Adjusts the volume of voice 2.
Voice2 Regen -99% to +99% Controls the amount of feedback from the output of the
pitch detuner back into the input. This allows you to
create special effects with ascending/descending delays.
Voice2 Width 1ms to 185ms Controls the splice width of voice 2. Select the width
that sounds best to you. Shorter values result in a
grainier sound, while longer values sound smoother.
Voice2 Mod 0% to 100% Controls the amount of modulation applied to voice 2.
LFO Rate 1/1 Sys to 1/32 Sys, 0.0Hz
to 20.0Hz
This parameter controls the rate of pitch modulation
which creates a chorusing effect. To achieve chorusing,
this rate must be very low.
LFO Shape Triangle, Sine, Sawtooth,
Square, Asym, 16-Step, 8-
Step, 4-Step
Determines the shape that the LFO will use for pitch
modulation.
LFO Phase -180deg to +180deg Controls the relative phase between left and right LFOs.
Regen Time 1/1 Sys to 1/32 Sys, 0ms to
185ms
Controls the amount of delay in the feedback path.
33
3 3222 2 C
C
C Chhhhaaaatttttttteeeerrrr BBB Booooxxxx
This insert effect uses a formant filter with a time-varying spectrum to impart a dynamic vocal-like
quality to almost any sound. Two LFOs are combined such that the filter morphs between four vowel
shapes that you select. The first LFO is also tied to an auto-panner, which can bounce the vocalized signal
through stereo space. Finally, a digital delay can be used to create highly unusual talking echo effects.
PPP Paaaarrrraaaam m m meeeetttteeeerrrr RRR Raaaannnnggggeeee D D D Deeeessssccccrrrriiiippppttttiiiioooonnnn
VCF Input Off, -49.5dB to 0.0dB Trims the input to the formant filter so that clipping
does not occur.
VCF Dry Amt Off, -49.5dB to 0.0dB Controls the level of the DDL signal to be mixed with
the output of the formant filter.
Shape 1 A, E, I, O, U, AA, AE, AH,
AO, EH, ER, IH, IY, UH,
UW, B, D, F, G, J, K, L, M,
N, P, R, S, T, V, Z
Select the shape of the first formant filter.