ENSONIQ ASR-X PRO, Руководство пользователя

Страница: 22 / 74

Tutorial
14 ENSONIQ ASR-X Pro UserÕs Guide
YouÕre going to be putting the samples you create into one of the kit sounds, so letÕs select one that
weÕre not already using in our sequence.
2. Turn the Sound Type knob to select the DRUM-KIT SoundFinder category, and turn the Sound
Name knob to select Dance Kit.
3. Hold down the Record button, press the Stop button, and then release both buttons to make sure
that weÕre at the beginning of our sequence.
4. Locate and press the Resampling Setup button.
5. Turn the Parameter knob until the display shows:
Meter:
Trig= ¼
This is where you can set a level that determines how loud audio has to be to cause the ASR-X Pro to
begin sampling. This is referred to as the
trigger threshol d.
6. Turn the Value knob counter-clockwise to move the level indicator as far leftward as it will go.
The farther to the left the indicator is set, the quieter the audio that will cause sampling to begin.
7. Turn the knob the other way to move the indicator to the right by one position.
8. Locate the Resampling Start/Stop button.
9. Press the Resampling Start/Stop button once.
The display shows ÒWaiting for triggerÓ on its top line, since the ASR-X Pro is waiting to hear some
audio before it starts sampling.
10. Press the Transport Play button to play the sequence.
On the display, youÕll see ÒSampling In ProgressÓ to show that youÕre now sampling.
Start
Stop
Setup
To Pad(s)
Send
Resampling
Scratch Pad™
Start
Stop
Setup
To Pad(s)
Send
Resampling
Scratch Pad™