Software Release: [App: 02.09.10039.00; Config: 2.9.20024; Built in PowerVision Configuration Studio Version:
2.9.23042; BTL: 02.09.10015.00]
Section 40
40
00-02-0996
2019-06-13
Relay Control:
(chosen for control of one of the relay outputs when function is active)
Shutdown, Controlled, Restart:
(chosen to allow the controller to shutdown through the
normal sequence of operation including cooldown when function is active. User
acknowledgement of the fault is
NOT
required to restart in Auto after shutdown occurs if
active shutdown is removed from controller)
DI Speed Set points
–
(Medium Security): used in place of Throttle Inc/Dec. Provides five throttle set
points to which the engine will throttle. These speed inputs will override any other throttling type.
When inputs are not active, any other throttling type in use will resume. Digital input 1 will override
2 through 4. Digital 2 will override 3 through 5 and so on.
Analog Inputs (1-8)
–
(Medium Security):
for each of the analog inputs, the ability to select the following
parameters exists:
Analog input 1.
Factory set to Disabled
Analog Input 2
. Factory set to Disabled
Analog Input 3
. Factory set to Disabled
Analog Input 4.
Factory set to Disabled
Analog Input 5
. Factory set to Disabled
Analog Input 6
. Factory set to Disabled
Analog Input 7.
Factory set to Disabled
Analog Input 8.
Factory set to Disabled
Function
–
(Medium Security):
Disabled
4-20 mA Oil Pressure
0-5V Oil Pressure
4-20mA Engine Temperature
0-5V Engine Temperature
4-20mA Fuel Level
0-5V Fuel Level
4-20mA Oil Temperature
0-5V Oil Temperature
4-20mA Suction Pressure
0-5V Suction Pressure
4-20mA Discharge Pressure
0-5V Discharge Pressure
4-20mA System Level
4-20mA Flow Rate
4-20mA Pump Oil Temperature
0-5V Pump Oil Temperature
4-20mA Pump Housing Temperature
0-5V Pump Housing Temperature
4-20mA Ambient Temperature
0-5V Ambient Temperature
4-20mA Gear Box Pressure
0-5V Gear Box Pressure
0-5V Throttle Input
Datcon Oil Pressure
Murphy Oil Pressure
– (ES2P-100)
VDO 5 Bar Oil Pressure
VDO 7 Bar Oil Pressure
Murphy Engine Temperature
– (ES2T-250/300)