Software Release: [App: 02.09.10051.00; Config: 2.9.20024; Built in PowerVision Configuration Studio Version: 2.9.23042;
BTL: 02.09.10015.00]
Section 40
59
00-02-0939
2019-06-13
2 Bytes
32
47
Read Only
Version.Config.3
Numerals
FFBA
4 Bytes
16
47
Read Only
Reserved
Reserved
FFBB
1 Bit
16
16
Read & Write
CAN Map EEPROM Values Save (Save
= 1)
(0 or 1)
1 Bit
17
17
Read Only
CAN Map EEPROM Values Saved
Confirmation (Saved = 1)
(0 or 1)
FFBC
1 Bit
16
16
Read & Write
Remote Alarm Acknowledgement
(0 or 1)
Supplementary Information
Passcodes
The MPC-10 & TEC-10 controllers house three levels of passcode protection. This feature allows the OEM,
technician or owner to set desired menu parameters to be shown and changed only by selected operators.
The three levels are low security, medium security and high security. The default passcodes can easily be
changed via the PC Configuration Software (also known as PowerVision for Controllers). Refer to the Glossary
section of this manual to know which parameters are set to low, medium and high by default.
Low Security:
allows operators to see the lowest security level menus items as set in PowerVision for
Controllers. This can be thought to be a user level menu where only particular items such as the warm-up
delay times and cool-down delay times are able to be shown and altered. This will keep the user from
getting confused in the menu and changing parameters they shouldn’t change.
Medium Security:
allows operators to see the low and medium security level menus items as set in
PowerVision for Controllers. This security can be thought to be a technician level where more access is
needed for other critical items in the menu but not necessarily the items like engine manufacturer and
Engine Emissions Tier Rating.
High Security:
allows operators to see the low, medium and high security level menus items as set in
PowerVision for Controllers. This level of security can be thought to be an OEM level where the entire
menu is present and is able to be changed. This security level allows the OEM full access to every menu
item while setting up the controller for a particular engine and/or application where the OEM may not want
the user to have access.
PC Configuration Software
PowerVision for Controllers (PC Configuration Software)
The MPC-10 / TEC-
10 controller is released utilizing Enovation Controls’ PowerVision Configuration
Studio
®
. PowerVision allows engineering the ability to deliver quicker software updates with the flexibility
of a software developer
’s environment. The addition of PowerVision gives Enovation Controls the ability to
provide a free-of-charge basic PC configuration program (PowerVision for Controllers) to all customers for
changing default parameters within the controller.
PowerVision for Controllers allows fast changes of default menu settings, customer splash screen,
parameters in the 4-up gauges screens, security levels, and text strings within the controller for a ready to
load and go setup. PowerVision for Controllers is available via download from our support website.
Login or Register for an Account to Access Downloads
Customers requiring a
software developer’s environment for changing or adding further functionality into
the controller may do so in their own time without waiting or paying non-recurring engineering fees (also
referred to as NRE) to make changes
. This developer’s environment is PowerVision Configuration Studio
®
and requires purchase of the software license from Enovation Controls. PowerVision Configuration Studio
®
