Endress+Hauser Picomag IO-Link, Руководство по эксплуатации

Страница: 22 / 64

Commissioning Picomag IO-Link
22 Hauser
9 Commissioning
9.1 Switching ON the measuring device
Once the supply voltage has been switched on, the measuring device adopts the normal
mode after a maximum of 4 s. During the start-up phase, the outputs are in the same state
as the measuring device in the switched-off state.
9.2 Overview of the operating menu
Overview of the operating menu
Guidance
▸ Identification →  22
▸ System units →  22
▸ Sensor →  23
▸ Output 1
→  24
▸ Output 2 →  24
▸ Totalizer →  29
▸ Display →  30
▸ Data management →  31
▸ Security
→  31
Diagnostics →  32
System
▸ Data management →  32
▸ Firmware →  32
9.3 Configuring the measuring device
9.3.1 Identification
The device tag and the user level can be changed in the Identification submenu.
Navigation
Menu: "Guidance" → Identification
9.3.2 Configuring system units
In the System units submenu, you can configure the units of all measured values.
Navigation