Endress+Hauser Picomag IO-Link, Руководство по эксплуатации

Страница: 27 / 64

Picomag IO-Link Commissioning
Hauser 27
Switch on if over the limit: Switch off if over the limit:
1
0
A
B
t
C
1.1
1.2
Q / T
A0034163
1.1 Input variables
1.2 Switch output
A
Switch-on point
B Switch-off point
C Hysteresis
Q / T
1
0
A
B
t
C
2.1
2.2
A0034164
2.1 Input variables
2.2 Switch output
A
Switch-on point
B Switch-off point
C Hysteresis
Switch on if within window: Switch off if within window:
Q / T
1
0
A
t
D D
3.1
3.2
B
B
A
A0034165
3.1 Input variables
3.2 Switch output
A
On-value (lower range limit)
B Off-value (upper range limit)
D Window
Q / T
1
0
A
B
t
D D
4.1
4.2
A
B
A0034166
4.1 Input variables
4.2 Switch output
A
On-value (lower range limit)
B Off-value (upper range limit)
D Window
Configuring the voltage output
The Voltage output submenu contains all the parameters that must be configured for the
configuration of the voltage output.
Navigation
Menu: "Guidance" → Output 1
Menu: "Guidance" → Output 2
Parameter overview with brief description
Parameter Description Selection/input Factory setting
Assign voltage output Select process variable for voltage output. • Off
• Volume flow
• Temperature
• Conductivity Volume flow
2 V value Enter the lower range value. Floating point number with sign 0 l/min
10 V value Enter the upper range value. Floating point number with sign Depends on the nominal diameter:
DN 15 (½"): 25 l/min
DN 20 (¾"): 50 l/min
DN 25 (1"): 100 l/min
DN 50 (2"): 750 l/min