Endress+Hauser Picomag IO-Link, Руководство по эксплуатации

Страница: 32 / 64

Commissioning Picomag IO-Link
32 Hauser
9.4 Diagnostics
The Diagnostics menu enables you to simulate, without a real flow situation, various
process variables in the process and the device alarm mode and to verify downstream
signal chains (switching of valves or closed-control loops).
Navigation
"Diagnostics" menu
Parameter overview with brief description
Parameter Description Selection/input Factory setting
Actual diagnostic A diagnostic event has occurred. Displays the current diagnostic event along with the diagnostic
information.

If two or more messages occur simultaneously, the message
with the highest priority is shown on the display.
Symbol for
diagnostic behavior,
diagnostic code and
short message.
Simulation process
variable Activate the simulation of process
variables. • Off
Simulation is deactivated.
• On
Simulation is activated.

Deactivate the simulation again once the test has been
performed.
Off
Volume flow value Enter the value for volume flow
simulation. Positive floating point number –
Temperature value Enter the value for temperature
simulation. Positive floating point number –
Conductivity value Enter the value for conductivity
simulation Positive floating point number –
9.5 System
The System submenu contains all the parameters that can be used for the administration
of the device.
Navigation
Menu: "System"
Parameter overview with brief description
Parameter Description Entry/selection/display Factory setting
Access status tooling Displays the access status. No user entry/selection possible. • Operator
• Maintenance Maintenance
Enter access code Enter the defined access code. →  31
Restrict write access to parameters in order to protect the device
configuration from unauthorized modification. 4-digit string of numbers 0000
Device reset Reset the entire device configuration or some of the configuration to a
defined state. • Cancel
• To factory defaults
• Restart device Cancel
Export configuration as
report The device configuration can be exported as a PDF report and saved in the
mobile device or forwarded with this function. - -
Save configuration to file The device configuration is saved in the app. The saved device configuration
can be transferred to another measuring device using the System → "Load
configuration from file" function. - -
Load Configuration from
file The saved device configuration can be uploaded to a new measuring device
with this function. - -