Endress+Hauser Picomag IO-Link, Руководство по эксплуатации

Страница: 54 / 64

Appendix Picomag IO-Link
54 Hauser
Designation ISDU
(hex) ISDU
(dec) Size
(byte) Data type Access Value range Factory setting Range
limits
Output 1
Operating Mode
IO-Link is set if connected to a
master
0x01F4 500 2 uint r/w P-Out=0
I-Out=1
S-In=2
S-Out=3
IO-Link=4
U-Out=5
off=6 IO-Link
Current output I-Out 1
I - OUT Assign 0x0258 600 2 uint r/w off=0
volume flow=1
temperature=2
conductivity=4 volume flow
Q-Start-Value
ASP
1)
for volume flow
Unit selection list from Unit
Volumeflow
0x0259 601 4 float r/w 0 l/min -9.9·10⁹
9.9·10⁹
Q-End-Value
AEP
2)
for volume flow
Unit selection list from Unit
Volumeflow
0x025A 602 4 float r/w 25/50/100/750
l/min -9.9·10⁹
9.9·10⁹
T-Start-Value
ASP
1)
for temperature
Unit selection list from Unit
Temperature
0x025F 607 4 float r/w -10 °C -9.9·10⁹
9.9·10⁹
T-End-Value
AEP
2)
for temperature
Unit selection list from Unit
Temperature
0x0260 608 4 float r/w +70 °C -9.9·10⁹
9.9·10⁹
s-Start-Value
ASP
1)
for conductivity
Unit selection list from Unit
Conductivity
0x025D 605 4 float r/w 0 -9.9·10⁹
9.9·10⁹
s-End-Value
AEP
2)
for conductivity
Unit selection list from Unit
Conductivity
0x025E 606 4 float r/w 1000 -9.9·10⁹
9.9·10⁹