Endress+Hauser Picomag IO-Link, Руководство по эксплуатации

Страница: 14 / 64

Mounting Picomag IO-Link
14 Hauser
5 Mounting
5.1 Mounting requirements
5.1.1 Mounting position
Mounting location
A0046065
Preferably install the sensor in an ascending pipe.
Inlet and outlet runs
No inlet and outlet runs need to be considered.
The installation dimensions provide information on the dimensions and installed
lengths of the device →  43
The arrow points in the preferred direction of flow. Measurement in the other
direction is also possible.→  23
5.2 Mounting the measuring device
Install the measuring device without any mechanical tension so that pipe forces are
not transferred to the measuring device.
L
WARNING
Burn hazard!
If medium temperatures or ambient temperatures exceed 50 °C, areas of the housing can
heat to over 65 °C.
‣
Safeguard the housing so that it cannot be touched accidentally.