Endress+Hauser Picomag IO-Link, Руководство по эксплуатации

Страница: 30 / 64

Commissioning Picomag IO-Link
30 Hauser
9.3.6 Configuring the display
The Display submenu contains all the parameters that can be configured for the
configuration of the onsite display.
Navigation
Menu: "Guidance" → Display
Parameter overview with brief description
Parameter Description Selection/input Factory setting
Format display Select how measured values are
shown on the display. Display value 1st line + display value 2nd line:
• Volume flow + temperature
• Volume flow + totalizer
• Tempe totalizer
• Volume flow + conductivity
• Tot conductivity
• Tempe conductivity Volume flow +
temperature
4 display values:
Volume flow + tempe tot conductivity
2 display values (multiplex):
Volume flow +totalizer / tempe conductivity
Rotation display Select local display rotation. • Auto (automatic)
• The display rotates automatically depending on the installation position Auto
• 0°
• Can be read in the horizontal installation position with flow from left to
right
A
A0033013
• 90°
• Can be read in the vertical installation position with flow from bottom to
top
A
A0033014
• 180°
• Can be read in the horizontal installation position with flow from right to
left
A
A0033015