Endress+Hauser micropilot M FMR 240 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 112

background image

Safety instructions

Micropilot M FMR 240 with PROFIBUS PA

4

E Hauser

1

Safety instructions

1.1

Designated use

The Micropilot M FMR 240 is a compact radar level transmitter for the continuous,
contactless measurement of liquids, pastes and sludge. The device can also be freely
mounted outside closed metal vessels because of its operating frequency of about
26 GHz and a maximum radiated pulsed energy of 1mW (average power output 1

µ

W).

Operation is completely harmless to humans and animals.

1.2

Installation, commissioning and operation

The Micropilot M has been designed to operate safely in accordance with current
technical, safety and EU standards. If installed incorrectly or used for applications for
which it is not intended, however, it is possible that application-related dangers may
arise, e.g. product overflow due to incorrect installation or calibration. For this reason,
the instrument must be installed, connected, operated and maintained according to the
instructions in this manual: personnel must be authorised and suitably qualified. The
manual must have been read and understood, and the instructions followed.
Modifications and repairs to the device are permissible only when they are expressly
approved in the manual.

1.3

Operational safety

1.3.1

Hazardous areas

Measuring systems for use in hazardous environments are accompanied by separate
"Ex documentation", which is an integral part of this Operating Manual. Strict
compliance with the installation instructions and ratings as stated in this supplementary
documentation is mandatory.

•

Ensure that all personnel are suitably qualified.

•

Observe the specifications in the certificate as well as national and local regulations.

1.3.2

FCC approval

This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause
undesired operation.

"

Caution!
Changes or modifications not expressly approved by the part responsible for
compliance could void the user’s authority to operate the equipment.

«
...
2
3
4
5
6
...
»

Содержание micropilot M FMR 240

















































































































Отзывы:

Нет отзывов

Похожие инструкции для micropilot M FMR 240

Бренд: Oakton Страницы: 4

Бренд: Omicron Страницы: 80

Бренд: Macnaught Страницы: 4

Бренд: Unipulse Страницы: 129

Бренд: IDEAL Страницы: 11

Бренд: IDEAL Страницы: 16

Бренд: Maico Страницы: 27

Бренд: Magnescale Страницы: 14

Бренд: BYOGuitar.com Страницы: 11

Бренд: Siko Страницы: 2

Бренд: Hanna Instruments Страницы: 2

Бренд: Lumel Страницы: 40

Бренд: sebaKMT Страницы: 131

Бренд: Kawai Страницы: 2

WIDE ANGLE CONVERSION PORT 2

Бренд: Nauticam Страницы: 12

Бренд: Zensol Страницы: 12

Бренд: IET Labs Страницы: 54

Бренд: Lutz Страницы: 72

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды