Endress+Hauser Memocheck Sim CYP03D Скачать руководство пользователя страница 6

Страница: 6 / 52

Basic safety instructions

Memocheck Sim CYP03D

Hauser

2.4

Operational safety

Before commissioning the entire measuring point:

1. Verify that all connections are correct.
2. Ensure that electrical cables and hose connections are undamaged.
3. Do not operate damaged products, and protect them against unintentional operation.
4. Label damaged products as defective.

During operation:

‣

If faults cannot be rectified:
products must be taken out of service and protected against unintentional operation.

2.5

Product safety

2.5.1

State of the art

The product is designed to meet state-of-the-art safety requirements, has been tested, and

left the factory in a condition in which it is safe to operate. The relevant regulations and

European standards have been observed.

2.5.2

Safety instructions for electrical equipment in hazardous areas

The Memosens inductive sensor cable connection system consists of:

• Memocheck Sim (Memosens technology) CYP03D

• Measuring cable CYK10
Memosens is approved for measuring applications in explosive atmospheres in accordance

with:

• IECEx design approval, IECEx BVS 12.0007

• ATEX design approval BVS 12 ATEX E 008 with amendments

The EC Declaration of Conformity is an integral part of these Operating Instructions.

The Memocheck Sim CYP03D is powered by three alkaline batteries with a total nominal

voltage of 4.5 V.

‣

Use only the following battery types!

Type

Manufacturer

Energizer

Type

EN91

Designation

LR6 (IEC)

battery, nominal

1.5 V

Chemical composition

Zinc/manganese dioxide (Zn / MnO2)

‣

not

open the Memocheck Sim CYP03D in hazardous areas.

Содержание Memocheck Sim CYP03D





















































Результаты поиска

Содержание Memocheck Sim CYP03D

Отзывы:

Похожие инструкции для Memocheck Sim CYP03D

Бренды по названию

Популярные бренды

Endress+Hauser Memocheck Sim CYP03D, Руководство по эксплуатации

Результаты поиска

Содержание Memocheck Sim CYP03D

Отзывы:

Похожие инструкции для Memocheck Sim CYP03D

Бренды по названию

Популярные бренды