ENCAD NovaCut 24, Руководство пользователя, Страница: 141 / 228

Maintenance 7-7
NovaCut User's Guide
APPENDICES
At this point, you can either drain, flush, and store the reservoirs or install
clean reservoirs provided with the Ink Reservoir Change Kit.
Draining and flushing ink out of reservoir (do this only if you
decide not to replace the reservoir)
1 Remove each ink reservoir from the side cover. If you save the ink, store
it in a clean container which can be sealed and will allow you to easily
refill the reservoir. Otherwise, you should dispose of the ink. Label each
reservoir to indicate the color of ink that it contained.
2 Thoroughly wash the reservoirs with distilled or RO water.
3 Thoroughly wash rubber caps with distilled or RO water.
4 Flush out the steel tube and CPC fitting on the reservoir using the CPC
reservoir adapter. This adapter opens the valve on the reservoir’s tubing
connection. Then a syringe can be attached to the adapter and the ink
captured in the reservoir tube can be purged.
CPC Reservoir Adapter
5 Rinse reservoirs once more with RO water and allow to dry.
6 Put the reservoirs back in the left cover assembly in the reverse order in
which they were removed and reinsert the black foam support.
7 Reinstall the ink reservoir on the printer and attach using the thumb-
screws. Do not overtighten.
8 Reconnect each ink delivery line to the appropriate reservoir and open all
the tubing clamps.
9 Ensure that the tubing clamps are open. Keeping the clamps closed for
long periods of time may cause the tubing to permanently crimp.
10 You are now ready to fill reservoirs with the new ink.