Remote Rack Sensor Wiring
Liebert
®
CRV
™
146
Figure 128 CANbus wire Cable with Grounding Wire
2
1
1
}
}
}
7
7
.25"
5
5
4
3
1.5
3
4
6
A
1.25
Length
(Depends on Part #)
Solder
Green
Notes:
1. Length tolerances for each dimensioned segment are ± .25 up to 12.00, ± .50 for 12.00 to 24.00, and
above 24.00 is equal to ± 1.0.
2. Wire identification numbers or letters are hot stamped on each end of a wire.
3. Any wire not terminated into a terminal/connector is provided with a strip length of .50.
4. Assembly must be provided in accordance with latest revision of Emerson engineering specification 1A10952.
5. Information in parenthesis is not to be hot stamped.
6. Wire tie(s) and jumper(s) require no specific location(s). Wire ends align on left side unless otherwise specified.
7. Labels 3" from connection.
Label:
“Sensor End”
Label:
“Unit End”
Pin 1
Pin 1
Detail A
Ground Wire
Heat Shrink
Drain Wire
WIRE CONNECTION
181510
Pg. 1, Rev. 4
Pair 1
Pair 2
Pair 3
Black
Brown
Blue
Violet
Yellow
1
2
3
4
5
6
1
2
3
4
5
6
1.5
7
7
}
}
}
8
Length
(Depends on Part #)
Green
Notes:
1. Length tolerances for each dimensioned segment are ± .25 up to 12.00, ± .50 for 12.00 to 24.00, and
above 24.00 is equal to ± 1.0.
2. Wire identification numbers or letters are hot stamped on each end of a wire.
3. Any wire not terminated into a terminal/connector is provided with a strip length of .50.
4. Assembly must be provided in accordance with latest revision of Emerson engineering specification 1A10952.
5. Information in parenthesis is not to be hot stamped.
6. Wire tie(s) and jumper(s) require no specific location(s). Wire ends align on left side unless otherwise specified.
7. Labels 3" from connection.
8. All agency information (UL andCSA), 300V rating, 75°C temperature rating, 24 AWG (3P), STP, <15pf/ft
capacitance and CMP labeled on cable.
Label Including Liebert Part Number,
Manufacture date, Manufacturer Name
10-12" From Connector End Of Cable
Snag Proof/Molded
Protector
Typ (2) Ends
Label:
“Unit End”
Pin 1
Pin 1
WIRE CONNECTION
181510
Pg. 2, Rev. 4
Black
Brown
Blue
Violet
Yellow
1
2
3
4
5
6
1
2
3
4
5
6
Pair 1
Pair 2
Pair 3
Ground Wire Soldered
To Drain Wire, Covered
By Molding
.540
20 Gauge Insulated
Ground Wire
Ring Terminal for No. 8 Screw
Shrink Tubing
If Applicable
4" Min.
1" Max.
This End Only
1" to 1.75"