manualshive.com logo in svg

Emerson AMPGARD RVSS, Инструкция пользователя

Поделиться
Скачать
Emerson AMPGARD RVSS Скачать руководство пользователя страница 8

8

EATON

 www.eaton.com

Instruction Booklet 

IB020003EN

Effective January 2021

AMPGARD RVSS

Reduced Voltage Soft-Starter

User Manual

Figure 54.   MUI control button disabled notification screen.  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Figure 55.   Information flow diagram and FDT/DTM layout.   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Figure 56.   inControl One Installer welcome screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Figure 57.   inControl license agreement screen.  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Figure 58.   inControl setup type selection screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Figure 59.   inControl performing complete installation.    . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Figure 60.   inControl custom installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Figure 61.   inControl installation completed.  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Figure 62.   Ampgard RVSS Device executable icon.  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Figure 63.   DTM install first screen.  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Figure 64.   DTM install second screen.  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Figure 65. DTM install third screen.   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Figure 66.   DTM install fourth screen.  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Figure 67.   DTM install fifth screen.  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Figure 68.   DTM install final screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Figure 69.   Files to be uninstalled.  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Figure 70.   BCM Modbus serial connection port.   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Figure 71.   BCM RS-485 connections.  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Figure 72.   MUI micro USB port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Figure 73.   inControl desktop icon. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Figure 74.   inControl initial screen.  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Figure 75.   Select empty project.  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Figure 76.   Focus on DEVICE tab.   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Figure 77.   Click File Save.  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Figure 78.   Browse for file destination.   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Figure 79.   Save as destination.  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Figure 80.   New project file name appears in Network Summary.   . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Figure 81.   Update Catalogue button.   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Figure 82.   Drag the Modbus Serial device from the Catalogue to the Network.  . . . . . . . . . . . . . . . 60
Figure 83.   Modbus Serial - Modal Configuration popup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Figure 84.   Windows COM port properties. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Figure 85.   Modbus Serial - Configuration tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Figure 86.   Successful connection from BCM to PC inControl.  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Figure 87.   Connect Ampgard RVSS device to Modbus Serial.  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Figure 88.   Modbus Serial - Set Address window (Modbus Slave Address). . . . . . . . . . . . . . . . . . . . 63
Figure 89.   Unsuccessful communications attempt.   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Figure 90.   Successful communications setup.  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Figure 91.   First time password setting option.  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Figure 92.   Security screen with set password and login procedures.   . . . . . . . . . . . . . . . . . . . . . . . 65
Figure 94.   Setup wizard first screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Figure 95.   Active control mode selections.  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Figure 96.   Local control source selections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Figure 97.   Remote control source selection.   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Figure 98.   Phase order selection.  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Figure 99.   Setup wizard second screen.  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Figure 100.  InControl AMPGARD RVSS application initial screen.  . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Figure 101.  RVSS application initial screen quick toolbar buttons.  . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Figure 102.  Admin PW entry field.   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Figure 103. 12. Security | 2. Admin PW MUI screen.  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Figure 104.  BCM DIP switches for IP address with Ethernet Card.  . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Figure 105.  Connect Modbus TCP to Network.   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Figure 106. Modbus TCP - Set Address window.   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Figure 107.  Modbus TCP connected to network.  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Figure 108.  Drag the Ampgard RVSS DTM to the Modbus TCP node. . . . . . . . . . . . . . . . . . . . . . . . . 72

Содержание AMPGARD RVSS










































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды