manualshive.com logo in svg

Emerson AMPGARD RVSS, Инструкция пользователя

Поделиться
Скачать
Emerson AMPGARD RVSS Скачать руководство пользователя страница 6

6

EATON

 www.eaton.com

Instruction Booklet 

IB020003EN

Effective January 2021

AMPGARD RVSS

Reduced Voltage Soft-Starter

User Manual

List  of Tables

Table 1.   

Appendices and subjects  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Table 2.    AMPGARD RVSS Ratings and Specifications   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Table 4.    RVSS protection  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Table 5.    I/O board signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Table 6.    Ethernet card module status (MS) indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Table 7.   

Ethernet card network status (NS) indicator   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Table 8.    I/O Board connectors J12 and J13 signals  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Table 9.    I/O board status LED functions   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Table 11.    Monitoring menu data  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Table 10.    Setup wizard MUI parameters  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Table 12.     MUI 

PRG

 menu groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Table 13.    Running/Stopped/Auto LED color settings  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Table 14.    Serial connection settings   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Table 15.    Ethernet card module status indicator states   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Table 16.    Ethernet card network status indicator states  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Table 17.    Login window fields and buttons  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Table 18.    Start page functions  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Table 19.    Main application window areas. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Table 20.    Quick access toolbar functions.  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Table 21.    Modbus register map  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Table 22.    Active fault/trip - register 312  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Table 23.    Active warning / alarm - register 313  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Table 24.    Tripped status bits - register 314  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Table 25.    Warning status bits - register 316   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Table 26.    Motor controller status bits - register 319  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Table 27.    Pre-Start fault code - register 332   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Table 28.    System status bits - register 300  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Table 29.    Start type - register 1018 (profile1), 1033 (profile 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Table 30.    Decel type - register 1019 (profile1), 1034 (profile 2)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Table 31.    MUI control bits - register 1004  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Table 32.    Trigger source event logger - register 819  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Table 33.    Trigger Configuration - register 822  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Table 34.    Trigger command word - register 802   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Table 35.    Datalogger module status - register 435  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Table 36.    Fault disable bitwise - register 1096 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Table 37.    RVSS motor characteristic parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
Table 38.    RVSS voltage ramp plus current limit mode of operation  . . . . . . . . . . . . . . . . . . . . . . . 107
Table 39.    Approximate RVSS settings for voltage ramp with current limit  . . . . . . . . . . . . . . . . . . 107
Table 40.    NEMA locked rotor codes   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Table 41.    Reference documents   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Table 42.    Software links . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Table 43.    AMPGARD RVSS Setup Parameters or Status (see inControl)  . . . . . . . . . . . . . . . . . . . .111
Table 44.    Eight bit binary to hexadecimal converter   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158
Table 45.    Current values   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
Table 46.    Voltage values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
Table 47.    Power values   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160

Содержание AMPGARD RVSS










































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды