ELTEX SMG-1016M, Руководство по эксплуатации

Страница: 71 / 441

SMG Digital Gateway
71
FTP server settings

Store files on FTP — when checked, CDRs will be transferred to FTP server

Server address/hostname — FTP server IP address

Server port — FTP server TCP port

Path on server — defines path to FTP server folder for CDR storage

Login — username for FTP server access

Password — user password for FTP server access
Reserve FTP server settings
When the main FTP server is unavailable, CDRs will be sent to a redundant server (when the redundant
FTP server is configured respectively) until the connection with the main FTP server is restored.

Store files on FTP — when checked, CDRs will be transferred to a redundant FTP server

Only if primary FTP failed – if the option is set, the saving of CDR files on a redundant FTP server
will be implemented only in case of a failure in recording to a main FTP server. Otherwise, CDR
files will be recorded to the main and redundant FTP servers simultaneously.

Server address/hostname — redundant FTP server IP address

Server port — redundant FTP server TCP port

Path on server — defines path to a redundant FTP server folder for CDR storage

Login — username for redundant FTP server access

Password — user password for redundant FTP server access
Other settings

Save unsuccessful calls — when checked, store unsuccessful calls (not resulted in conversation)
into CDR files.

Save empty files — when checked, save CDR files without records.

Write redirected call duration — when checked, CDR for a call redirected from 'discinfo: redirected
call;' will contain an actual call duration; when unchecked, duration will be set to zero.

Swap redirecting number and CgPN – the option might be used for redirected calls in case of
simultaneous use of CgPN and Redirecting number fields in CDR entries. In case of absence of
Redirecting number field in an CDR entry, CgPN is replaced by Redirecting number for redirected
calls.

Round duration — this option specifies duration rounding mode in CDRs:
–
Upwards — call duration rounding mode; call duration value will be rounded up when it
exceeds 330ms;
–
Downwards — call duration rounding mode; call duration value will be rounded down
when it exceed 850ms.
–
Without round (use msec) — in the mode, call duration will be not rounded and it will be
recorded within the accuracy of milliseconds.