ELTEX SMG-1016M, Руководство по эксплуатации

Страница: 351 / 441

SMG Digital Gateway
351
Syntax
spanning-tree admin-p2p <type>
no spanning-tree admin-p2p
Parameters
<type> — connection identification type:
–
auto — identification is based on BPDU.
–
force-false — forcedly set link as non-p2p.
–
force-true — forcedly set link as p2p.
Default value
p2p connection type identification is based on BPDU
Command mode
INTERFACE FRONT-PORT
INTERFACE PORT-CHANNEL
Example
SMG2016-[CONFIG]-[SWITCH]-[if]> spanning-tree admin-p2p auto
For the configured port, p2p connection type identification is based on BPDU.
spanning-tree auto-edge
Use this command to set the automatic bridge detection on the configured interface.
The command in negative form (no) disables automatic bridge detection on the configured interface.
Automatic bridge detection function is enabled by default.
Syntax
[no] spanning-tree auto-edge
Parameters
There are no parameters for this command.
Command mode
INTERFACE FRONT-PORT
INTERFACE PORT-CHANNEL
Example
SMG2016-[CONFIG]-[SWITCH]-[if]> spanning-tree auto-edge
'Automatic bridge detection' function is enabled.
3.4.6 MAC table configuration commands
mac-address-table aging-time
Use this command to set the MAC address lifetime globally in a table.
The command in negative form (no) defines the default MAC address lifetime.