ELTEX SMG-1016M, Руководство по эксплуатации

Страница: 75 / 441

SMG Digital Gateway
75

redirecting — the caller has redirected a call to the callee;

redirected — caller was forwarded to another subscriber.
Pickup mark:

normal - a call was not picked up;

pickup - a call was picked up.
Release side mark – side where signal of connectivity break came from. This signal takes the next values:
1) originate –caller ends the call;
2) answer –callee ends the call.
Incoming/outgoing SS7 CIC - number CIC for incoming/outgoing call. If a call wasn’t performed via SS7
interface field will be empty;
Incoming/outgoing SIP Call-ID - Call-ID of incoming/outgoing call. If a call wasn’t performed via SIP field
will be empty;
Incoming/outgoing SS7 category - category of SS7 caller on input (before modification on incoming TG) or
on output (after modifications of incoming and outgoing TG);
Incoming/outgoing CID category – CID category on input (before modification on incoming TG) or on
output (after all modifications of incoming and outgoing TG);
Incoming/outgoing Е1 stream – number of incoming/outgoing E1 flow. If call wasn’t performed by E1 flow
the field will be empty;
Incoming/outgoing Е1 channel – number of incoming/outgoing E1 channel. If a call wasn’t performed via
E1 field will be empty;
Sequence number – two numbers separated by hyphen. First is a time tag generated during the device
start, the second – sequence number of the CDR record.
Incoming/outgoing redirecting number – for warder number on input (before modification in incoming
TG) or on output (after all modifications in incoming and outgoing TG);
RADIUS Accounting-Session-Id - ‘Acct-Session-Id’ attribute value transmitted to RADIUS.
Global Callref – Global Call Reference field which is formed by the following rule:
"|XX.XX.XX|YY.YY.YY.YY.YY", where:
XX.XX.XX - originating point code in the form of little-endian HEX;
YY.YY.YY.YY.YY - sequence number of a call in the form of little-endian HEX;
Incoming/outgoing numplan – dial plan number through which call was transmitted and received.
3.1.4.4 Example of CDR file
Example of CDR file, that contains four entries. Heading adding to a file is enabled, following fields has
been chosen:
1. Sequence number;