ELTEX SMG-1016M, Руководство по эксплуатации

Страница: 333 / 441

SMG Digital Gateway
333
quit
Terminate this CLI session
save
Save QoS settings without applying
set
802.1p_prio_mapping <PRIO>
<QUEUE>
0-7
0-3
Distribute packets into queues
depending on the 802.1р priority
PRIO — 802.1р priority number
QUEUE — queue number
set
default_VLAN_priority <PORT>
<DEFPRIO>
GE_PORT0(0)/
GE_PORT1(1)/
GE_PORT2(2)/
CPU(4)/
SFP0(6)/
SFP1(7)
0-7
Define 802.1р priority to untagged
packets received by this port. If 802.1р
or IP diffserv priority is already assigned
to the packet, this setting will not be
used ('default vlan priority' will not be
applied to packets containing IP
header, when one of the QoS modes is
in use: DSCP only, DSCP preferred,
802.1p preferred, and also to untagged
packets.
set
diffserv_prio_mapping <NUMBER>
<QUEUE>
*1
0-3
Distribute packets into queues
depending on the IP diffserv priority
NUMBER — IP diffserv priority number
QUEUE — queue number
set egress_limit <PORT>
<EGRLIM>
GE_PORT0(0)/
GE_PORT1(1)/
GE_PORT2(2)/
CPU(4)/
SFP0(6)/
SFP1(7)
on/off
Enable/disable the bandwidth
restriction for outgoing port traffic
set egress_rate_limit <PORT>
<EGRRATE>
GE_PORT0(0)/
GE_PORT1(1)/
GE_PORT2(2)/
CPU(4)/
SFP0(6)/
SFP1(7)
0-250000
Enable the bandwidth restriction (in
kbps) for outgoing port traffic
set
ingress_limit_mode <PORT>
<INGRMODE>
GE_PORT0(0)/
GE_PORT1(1)/
GE_PORT2(2)/
CPU(4)/
SFP0(6)/
SFP1(7)
off/
all/
mult_flood_broad/
mult_broad/
broad
Enable restriction mode for traffic
coming to the current port.
INGRMODE — restriction mode:
- off — no restriction.
- all — restrict all traffic.
-
mult_flood_broad — multicast,
broadcast,
and flooded unicast traffic will be
restricted.
- mult_broad — multicast and
broadcast traffic will be restricted.
- broad — only broadcast traffic will
be restricted.
set ingress_rate_
prio_0/1/2/3
<PORT>
<INGPRIO>
GE_PORT0(0)/
GE_PORT1(1)/
GE_PORT2(2)/
CPU(4)/
SFP0(6)/
SFP1(7)
0-250000
Define the bandwidth restriction (in
kbps) for incoming port traffic for
queue 0/1/2/3.