ELTEX SMG-1016M, Руководство по эксплуатации

Страница: 326 / 441

326
SMG Digital Gateway
<NUMBER> subscriber phone
number
set by index pbx_profile <INDEX>
<PROFILE>
Subscriber index
0-15
Specify PBX profile using subscriber index
set by index stream <INDEX>
<STREAM>
Subscriber index
0-15
Set E1 stream, where subscriber is
located, using subscriber index
show all
Show settings for all PRI subscribers
show by id <USER_ID> Subscriber ID
Show subscriber setting using subscriber
ID
show by index <INDEX> Subscriber index
Show subscriber setting using subscriber
index
show count
Show the total quantity of PRI
subscribers
show list users
Show the list of PRI subscribers
3.3.37 VAS configuration mode for PRI subscribers
To enter this mode, implement the command
service <USER_INDEX>
(where USER_INDEX is a PRI
susbcriber index) in PRI subscriber configuration mode.
SMG2016-[CONFIG]-[PRI-USERS]> service 0
Entering User-Service mode for user 0
SMG2016-[CONFIG]-[PRI-USERS][0]-SERVICE>
Command Parameter Value Action
?
Show the list of available commands
attach service
block
Enable VAS for a subscriber
detach service
block
Disable VAS for a subscriber
set cfb enable <ON_OFF> off/on
Enable "call forwarding on busy" service
set cfb number <ON_OFF> a number of 30
characters or none
Set a number for "call forwarding on
busy" service. None – disable call
forwarding.
set sfnr enable <ON_OFF> off/on
Enable "call forwarding on no-reply"
service
set sfnr number <ON_OFF> a number of 30
characters or none
Set a number for "call forwarding on no-
reply" service. None – disable call
forwarding.
set cfos enable <ON_OFF> off/on
Enable "call forwarding on out-of-
service" service
set cfos number <ON_OFF> a number of 30
characters or none
Set a number for "call forwarding on out-
of-service" service. None – disable call
forwarding.
set cfu enable <ON_OFF> off/on
Enable "call forwarding unconditional"
service
set cfu number <ON_OFF> a number of 30
characters or none
Set a number for "call forwarding
unconditional" service. None – disable
call forwarding.
show
Show the current VAS settings
show count
Show the quantity of free VAS blocks
3.3.38 SS7 category modification configuration mode
To enter this mode, execute 'ss7cat' command in the configuration mode.
SMG-[CONFIG]> ss7cat