ELTEX SMG-1016M, Руководство по эксплуатации

Страница: 354 / 441

354
SMG Digital Gateway

unit — module number; possible value [1],

port — port number, possible values [0 .. 2].
–
for port-channel: [0 .. 4].
–
for sm-port:

unit — module number; possible value [1],

port — port number; possible values [0 .. 5].
Command mode
CONFIG-SWITCH
Example
SMG2016-[CONFIG]-[SWITCH]> mirror rx interface front-port 1/3
For traffic incoming to front-port 1/3 interfaces, the
'port mirroring' operation is enabled. Traffic is copied from slot-ports to analyzer port defined with 'mirror
rx analyzer' command.
mirror <rx|tx> analyzer
Use this command to specify a port, that the packets for analysis of traffic incoming/outgoing from/to ports
defined with 'mirror rx port/ mirror tx port' command will be copied to.
The command in negative form (no) disables analysis of transferred incoming/outgoing traffic.
Syntax
[no] mirror <rx|tx> analyzer <interface><port>
Parameters
<rx|tx> — traffic type:
–
rx — incoming
–
tx — outgoing
<interface> — interface type. As an analyzer port, you may use front-port, port-channel interfaces only.
<port> — sequential number of the front-port group port in <unit/port> format, where:
–
for front port: <unit/port>, where:

unit — module number; possible values [1],

port — port number; possible values [0 .. 3].
–
for port-channel: [0 .. 4].
Command mode
CONFIG-SWITCH
Example
SMG2016-[CONFIG]-[SWITCH]> mirror rx analyzer front-port 1/2
Data for an external analysis will be mirrored to the front-port 1/2 from the port(s) that have 'incoming
traffic mirroring' enabled.