ELTEX SMG-1016M, Руководство по эксплуатации

Страница: 362 / 441

362
SMG Digital Gateway
lldp reinit
Use this command to define the minimum amount of time that LLDP port will wait before LLDP reinitialization.
The command in negative form (no) restores the default value.
Syntax
lldp reinit <reinit>
no lldp reinit
Parameters
<reinit> — time, possible value [1 .. 10] seconds.
Default value
The default value is 2 seconds.
Command mode
CONFIG SWITCH
Example
SMG2016-[CONFIG]-[SWITCH]> lldp reinit 3
lldp timer
Use this command to define the frequency of LLDP information updates transmission by the device.
The command in negative form (no) restores the default value.
Syntax
lldp timer <timer>
no lldp timer
Parameters
<timer> — time, possible value [5..32768] seconds.
Default value
The default value is 30 seconds.
Command mode
CONFIG SWITCH
Example
SMG2016-[CONFIG]-[SWITCH]> lldp timer 60
lldp tx-delay
Use this command to define the delay between the subsequent LLDP packet transmissions, initiated by changes
of values or status in local LLDP MIB database.
We recommend setting this delay less than 0.25* LLDP-Timer.
The command in negative form (no) restores the default value.