ELTEX SMG-1016M, Руководство по эксплуатации

Страница: 51 / 441

SMG Digital Gateway
51
Alarm Indication

Fans operation — when checked, fault indication will appear in case of cooling fan failure (ALARM
LED will light up, alarm will be added to alarm log).

CPU load — when checked, fault indication will appear in case of high CPU utilization (ALARM LED
will light up, alarm will be added to alarm log).

RAM usage — when checked, fault indication will appear in case of high RAM utilization (more
than 75% of the total RAM amount) (ALARM LED will light up, alarm will be added to alarm log).

Local disk drive free space — when checked, fault indication will appear, if the utilization of a
single external storage device with capacity less than 5Gb exceeds 80% (or there is less than
1024MB of free space on an external storage device with capacity exceeding 5Gb) (ALARM LED
will light up, alarm will be added to alarm log).
Autoupdate settings
SMG can automatically obtain configuration and firmware files from server with specified frequency.
SMG will apply new configuration after completing of all active calls or before a reboot.
Firmware version description file contains information about firmware versions on the server: numbers of
versions and file names. In this file you can define time to update. Format of the file must be as followings:
<Number of firmware version>;<Firmware file name>;<permitted update time, hour>

Number of firmware version - defines completely, including assembling version;

Firmware file name must have .bin extension;

It is not necessary to assign permitted update time . SMG will be updated as soon as active calls are
finished. If you specify the time, SMG will be updated only within this time range.
Example of firmware description file:
3.7.0.1944;smg1016m_firmware_3.7.0.1944.bin
3.8.0.2050;smg1016m_firmware_3.8.0.2050.bin;9-13

Enable autoupdate — enable automatic firmware update;

Source — server information source select;
–
Static — information about server is written and saved on SMG
–
DHCP (interface name) — information on a server is obtained on specified interface via
DHCP option 66, information on a version and configuration file names is obtained via
option 67;

Protocol — protocol selection for server connection;

Authentication — use authentication to get access to the server (for FTP, HTTP, HTTPS);
–
Username — name (login) for access to the server;
–
Password — password for access to the server;

Server — IP address or domain name of server. Available if you select Static Source;

Configuration update — allows configuration update from server;