ELTEX SMG-1016M, Руководство по эксплуатации

Страница: 24 / 441

24
SMG Digital Gateway
Table 3 — Description of rear panel connectors of the switch
Item
Rear Panel Element Description
1 Power supply connector Connector for power supply
2 Removable fans Removable ventilation modules with hot-swapping
3
Earth bonding point
Earth bonding point of the device
1.5.2 SMG-2016
SMG-2016 digital gateway has a metal case available for 19” form-factor rack-mount 1U shelf installation.
The front panel of the device is shown in the figure below.
Fig. 12 — SMG-2016 front panel layout
Connectors, LEDs and controls located on the front panel of the device are listed in
Table 4
.
Table 4 — Description of connectors, LEDs, and controls located on the front panel
№ Front panel elements Description
1 SATA disk ports Cradle connectors for SATA drive installation
2 F Function button
3
Console
Console port for local device management (for connector wiring, see
Appendix A)
4 USB USB port for external storage device connection
5
0, 1
2 x 10/100/1000 Base-T Gigabit uplink interface RJ-45 Ethernet
connectors used for IP network connection
6
2,3
2 chassis for 1000 Base-X uplink interface SFP modules used for IP
network connection
2 x 10/100/1000 Base-T Gigabit uplink interface RJ-45 connectors
used for IP network connection
7
E1 Line 0..15
16 x RJ-48 connectors for Е1 streams connection (for connector
wiring, see Appendix A)
8
Sync.0, Sync.1 2 x RJ-45 ports for connection of external synchronization sources
Indicators
9
Alarm Device alarm indicator
Status Device operation indicator
Sync.1 Sync.2 external synchronization interface operation indicator