ELTEX SMG-1016M, Руководство по эксплуатации

Страница: 202 / 441

202
SMG Digital Gateway

NAS-Port-Type — NAS physical port type (server for user authentication), default value is Async.

Service-Type — type of service, not used by default (Not Used).

Framed-protocol — protocol specified for the packet access utilization, not used by default (Not
Used).

Class — AV-Pair Class field processing for category change:
–
Not used — do not process AV-Pair Class field.
–
SS7 category — use value of the received AV-Pair Class field as the caller SS7 category.
RADIUS-Accounting settings:

Send requests:
–
accounting-start — send 'accounting' start packet that notifies RADIUS server on the call
start.
–
accounting-stop — send 'accounting' stop packet that notifies RADIUS server on the call
end.
–
accounting-stop for unsuccessful calls — send information on unsuccessful calls to RADIUS
server.
–
accounting-update with period — send 'update' packet during a call to RADUIS server with
the definite period, that notifies RADIUS server on the call active state.
–
accounting for call-origin=originate — send 'RADIUS-Accounting' messages for incoming
connection branch.
–
accounting for call-origin=answer — send 'RADIUS-Accounting' messages for outgoing
connection branch.
You may limit sending billing information in RADIUS on the basis of the modifier mask. Select one or more
modifiers in "Modifiers settings" and select "Restrict" in the "Send requests by modifiers" field. In this case,
billing information will be sent to RADIUS only if the number complies one of the mask in the modifiers table.
The modification will be implemented as usual, according to modifiers table rules.
When "Send requests by modifiers" is set to "Restrict", billing information will not be sent for the
calls which numbers is not in the modifier mask.

Cisco adaptation - swap originate and answer is accounting messages;

Use UTC timezone — send time in 'RADIUS- Accounting' messages in UTC format;

Round duration - rounding selection for RADIUS-Accounting messages. Three options are available
- rounding up, rounding down and not rounding (transmit milliseconds).

Access restriction on server failure - during server fault (response non-reception), you may impose
restrictions upon the outgoing communications:
–
no restrictions — allow all calls.
–
local and zone networks only — allow calls to emergency services, local and zone network.
–
local network only — allow calls only to emergency services.
–
deny all — deny all calls.
This restriction governs the call routing by a prefix controlling the corresponding call type (local, long-
distance, etc.).