ELTEX SMG-1016M, Руководство по эксплуатации

Страница: 299 / 441

SMG Digital Gateway
299
SMG-[CONFIG]> pbx_profiles
Entering PBX profiles mode.
SMG-[CONFIG]-PBX_PROFILES>
Command Parameter Value Action
?
Show the list of available commands.
add pbx <NAME>
<PREFIX>
<PFX>
String, 63
characters max.
1-15
0-255/none
Add PBX profile with the specified name,
prefix number and direct prefix number
config
Return to Configuration menu.
exit
Exit from this configuration submenu to the
upper level.
flash mode <PROFILE_INDEX>
<FLASH>
0-31
none/
flash1/
flash2/
flash3
Flash signal transmission mode
history
View the command history
history
View history of entered commands.
modifiers table
incoming called <PROFILE_INDEX>
<MODTBL_INDEX>
0-31
0-255/none
Define PBX profile modifier based on the
analysis of the callee number received from
the incoming channel.
modifiers table
incoming calling <PROFILE_INDEX>
<MODTBL_INDEX>
0-31
0-255/none
Define PBX profile modifier based on the
analysis of the caller number received from
the incoming channel.
modify pbx
connected number
transit
<CONNNUM> normal/block
Deny 'Connected number' field transmission
modify pbx
direct_pfx
<PROFILE_INDEX>
<PFX>
0-31
0-255/none
Transition to the prefix without caller or
callee number analysis. It enables switching
of all calls coming from SIP subscriber to a
trunk group regardless of the dialled
number (without mask creation in prefixes).
modify pbx
inband messages
<PROFILE_INDEX>
<YES/no>
0-31
Transmission of voice message phrases
modify pbx name <IDX>
<NAME>
0-31
String,
63
characters max.
Rename the specific profile
modify pbx
prefix
<IDX>
<PREFIX>
0-31
Up to 15 digits or
'none'
Redefine the PBX prefix for the specified
profile
modify pbx
routing_profile
<IDX> 0-127
Select scheduled routing profile
timeout busy-
signal
<TIMER> 0-31
Busy tone timeout for call transfer service
timeout cfnr <TIMER> 0-31
Call forward on no reply (CFNR) timeout
timeout cfoos <TIMER> 0-31
Call forward on out of service (CFOOS)
timeout
timeout first-
digit
<TIMER> 0-31
First digit dial timeout for call transfer
service
timeout next-
digit
<TIMER> 0-31
Next digit dial timeout for call transfer
service
quit
Terminate this CLI session
remove pbx <IDX> 0-31
Remove PBX profile with the specific
number
show pbx
Show the PBX profile list