92
Parameter setting
Weather Station Suntracer KNX sl
• Version: 14.07.2016 • Technical changes and errors excepted.
When specifying the conditions
by object
the minimum and maximum temperature
and time values that can be set and the temperature increment for the change are also
defined.
Status output façade
Information on the various possibilities for the status output can be found in chapter
Status output
, Seite 87. In principal the status output is a singular function, but, in com-
pact form, possible for singular and for all façades possible. For the output in a com-
pact form pre-sets are made here and the output texts defined.
Preset frost protection values per
Parameter • object
Start frost alarm when
an external temperature of (in 0.1 °C)
is not reached.
(for definition via an object only valid until
first call)
-200 ... 300; 20
during or until (in hours)
after precipitation.
(for definition via an object only valid until
first call)
1 ... 10; 5
End frost alarm when
an external temperature of (in 0.1 °C)
-200 ... 300; 50
for more than (in hours)
is exceeded.
1 ... 10; 5
Start frost alarm when
Minimum outdoor temperature that can be
set (in 0.1 °C)
-200 ... 300; -10
Maximum outdoor temperature that can be
set (in 0.1 °C)
-200 ... 300; 40
Minimum start-time that can be set
(in 0.1 °C)
1 ... 10
Maximum start-time that can be set
(in 0.1 °C)
1 ... 10
End frost alarm when
Minimum outdoor temperature that can be
set (in 0.1 °C)
-200 ... 300; 20
Maximum outdoor temperature that can be
set (in 0.1 °C)
-200 ... 300; 100
Minimum start-time that can be set
(in 0.1 °C)
1 ... 10
Maximum start-time that can be set
(in 0.1 °C)
1 ... 10
Temperature increment (in 0.1 °C)
0 ... 250; 5
Time increment ± 1 hour
