113
Parameter setting
Weather Station Suntracer KNX sl
• Version: 14.07.2016 • Technical changes and errors excepted.
For
Calculations of the form output 1 = E1 × X + Y | output 2 = E2 × X +Y
define
the variables X and Y. The variables can have a positive or negative sign, 9 digits before
and 9 digits after the decimal point.
Further settings for all formulas
If necessary, activate the input monitoring. Set which inputs are to be monitored, at
which intervals the inputs are to be monitored and what value the "monitoring status"
should have, if the monitoring period is exceeded without feedback.
If necessary, activate the computer block and set what a 1 or 0 at the block entry means
and what happens in the event of a block.
6.21. Weekly timer
In the weekly timer in the device 24 periods can be defined. These periods are, for ex-
ample, used for the internal automatic function timed opening and timed closure.
The respective period objects can be configured as inputs or outputs, i.e. send to the
bus (timer internal, use internal and for other bus members) or be switched from there
Formula for output A1: A1 = E1 × X + Y
X
1.00 [free input]
Y
0.00 [free input]
Formula for output A2: A2 = E2 × X + Y
X
1.00 [free input]
Y
0.00 [free input]
Use input monitoring
No • Yes
Monitoring of
• E1
• E2
• E3
• E1 and E2
• E1 and E3
• E2 and E3
• E1 and E2 and E3
[depending on the function]
Monitoring period
5 s • ... • 2 h; 1 min
Value of the object "monitoring status"
if period is exceeded
0 • 1
Use block
No • Yes
Analysis of the blocking object
• At value 1: block | At value 0: release
• At value 0: block | At value 1: release
Value before first call
0 • 1
Output pattern
On block
• do not send anything
• send value
On release
• as send pattern [see above]
• send current value immediately
